bookbashuk Chapter 200 Yi Zhonghai's hatred begins to transform
Chapter 200 Yi Zhonghai's hatred begins to transform
Yi Zhonghai listened from the side and felt sour in his heart.
Doesn't he want to follow Li Yang?
When he was in the fitter group, he was one of the best.
If it weren't for that bastard Jia Dongxu, my hand wouldn't be disabled.
Not to mention being reduced to wiping manure here!
Thinking of this, Yi Zhonghai clenched his fists tightly.
"By the way, the factory has also specially arranged meals for this project!"
The bald master lowered his voice and said mysteriously
"It is said that not only are two meals provided, but also midnight snacks are provided if you work overtime at night!"
"Oh my god! Such treatment, such treatment..."
The man wearing glasses smacked his lips, his eyes shining.
"Of course not! During the last steel mill project, we enjoyed a month of free meals.
It smells so good, much better than at home!"
The bald master recalled with a longing look on his face.
As Yi Zhonghai listened, he felt his stomach growling.
In the past, he could eat full meals every day, and every meal consisted of meat.
But now, I only eat two dry steamed buns every day and can’t even see any pickles.
Thinking of this, his eyes turned red.
"Let's go and sign up! Otherwise someone else will get there first!"
The bald master slapped his thigh, said this, and left the toilet with the man with glasses.
Before leaving, they did not forget to wink at Yi Zhonghai, meaning that he should also try his luck.
But how could Yi Zhonghai not understand?
With the condition he is in now, will Li Yang want him?
After all, it was all thanks to Jia Dongxu's grandson!
Thinking of this, Yi Zhonghai felt that he had nowhere to vent his anger.
He hated it! He hated Jia Dongxu, this villain, for ruining his reputation!
He hated the factory for kicking him out and turning him into a useless person!
He hated Li Yang even more because he stole his limelight and made him unable to hold his head up in front of his co-workers!
Yi Zhonghai became more and more angry, and his hand holding the cane was shaking slightly.
He swore secretly in his heart:
One day, he would make Jia Dongxu and Li Yang kneel before him and admit their mistakes!
Let's start with that bastard Jia Dongxu!
Yi Zhonghai thought sinisterly, with a sneer on his face.
Just wait, Jia Dongxu, I will settle this account with you sooner or later!
Ever since the last time he was tripped by Jia Dongxu, Yi Zhonghai has hated Jia Dongxu to the core.
If it weren't for this villain interfering, would my hand have been broken?
It was to frame me that I deliberately connected the power supply of the machine tool in reverse, which caused such a disaster!
Thinking of this, Yi Zhonghai felt so angry that his teeth itched.
He swore that he would make Jia Dongxu suffer the consequences!
……
After a heated discussion, everyone understood the renovation drawings brought by Li Yang.
This open-hearth furnace has been in service in the factory for many years. Although it has undergone some minor repairs, it is still an old piece of equipment after all.
If you want to completely transform it and achieve top and bottom blowing, the difficulty can be imagined.
However, when Li Yang explained his renovation plan, everyone gradually put aside their concerns.
The key to this seemingly complicated project lies in two parts - the air inlet and the air outlet!
"Everyone, look here." Li Yang pointed to a spot on the side of the furnace on the drawing and said, "This is where we need to focus on the transformation. The traditional open furnace relies on side-blown air to supply oxygen, which is inefficient. What we need to do is to open oxygen nozzles and oxygen-enriched gas pipelines on the top and bottom of the furnace respectively."
"The oxygen lance on the top of the furnace is responsible for blowing high-purity oxygen onto the surface of the molten steel, allowing it to oxidize impurities as quickly as possible. At the same time, the oxygen-rich gas at the bottom of the furnace plays a role in stirring the molten steel, making the decarburization reaction more thorough."
Li Yang explained while gesturing on the blueprint. Everyone listened with great interest and nodded in agreement from time to time.
"Then, what about the furnace itself? Does it need major changes?" someone raised the question.
"The furnace doesn't need to be moved much." Li Yang said with a smile:
"After all, this is high-quality steel plate imported from Russia. After years of testing, its strength and heat resistance are beyond reproach.
What we need to do is to install removable end covers at both ends to transform it into a tiltable structure.
"Is that so? That's much simpler!" Everyone suddenly understood and smiled with relief.
With a mature furnace body as the foundation, the rest of the work will not be difficult.
As long as we use our brains to improve the air inlet and outlet, and make some improvements, this flat furnace can be transformed into a top and bottom double-blown converter, right?
"Then what are we waiting for? Let's go to the workshop and work!" Someone couldn't hold back and was the first to shout the slogan.
"Yes! From now on, we are the vanguard of reform! We swear to make the top and bottom blow again and roar in our factory as soon as possible!"
The inspiring shouts echoed in the conference room. Li Yang looked at this group of high-spirited steel warriors with a proud smile on his face. Yes, with such a brave and hard-working team, how far can the dream be?
Once the renovation plan was finalized, the workshop immediately became busy.
The design drawings were distributed to each work section one by one. The masters gathered in front of the chopping board, carefully studying every detail and racking their brains to discuss the manufacturing plan.
"This oxygen gun must be made of high-quality stainless steel. And the surface must be polished to reduce oxygen wear."
"The gas pipeline at the bottom of the furnace must be lined with high-temperature resistant corundum bricks, otherwise it will be a disaster if it burns out."
"There is also the furnace's hydraulic system, the coordination between the piston and the cylinder, which cannot be sloppy at all..."
Everyone contributed their ideas and put their heads together to come up with suggestions for this great transformation.
Under Li Yang's guidance, plans for key components were gradually finalized.
Soon, the roar of machines could be heard in every corner of the workshop. On the milling machine, the cutter head rotated rapidly, and metal chips flew;
In front of the forging press, the hammer falls heavily, and the steel billet is gradually formed amid sparks;
In the welding area, the arc shines and the workpieces are closely connected in the welding sparks...
People worked hard, sweating profusely and forgetting to eat and sleep, as key components gradually took shape in their hands.
The most eye-catching thing is the oxygen gun that Li Yang personally participated in making.
He put on goggles, put on a heat-insulating suit, walked to the milling machine, and started the most critical processing.
The milling cutter fell like a sharp sword, quickly cutting across the blank.
Accompanied by a sharp "hissing" sound, each part was milled into its rough shape.
In Li Yang's hands, they will undergo a more difficult test.
Li Yang picked up the grinding machine and began the most delicate grinding.
I saw him holding the grinding wheel with both hands, his eyes sharp and his whole attention focused.
The grinding wheel moved across the workpiece surface, emitting bursts of sparks, wisps of metal powder flew up, and the surface of the oxygen gun gradually became as smooth as a mirror.
"Oh my God, your hands aren't shaking at all? This is hand-polishing!" Some people were horrified and secretly astonished.
"This is the real ability of Deputy Section Chief Li! Don't look at his young age, when it comes to hands-on ability, he is first-class!" another master exclaimed.
Everyone suddenly realized that Li Yang was not only a theorist, but also a technical expert! The level of an eighth-level fitter is probably only this high, right?
In fact, everyone present is more or less a master of hands-on work.
After all, in this era, technology cannot be developed on paper alone, but must be put into practice.
But even so, most of them can only do some simple processing, and they are really not capable of a job as difficult as Li Yang's.
"This is a young talent! He is versatile and an all-rounder!" The old masters praised him and looked at Li Yang with respect.
In the eyes of this group of veteran engineers and technicians, Li Yang's image has undoubtedly become more and more prominent.
For a young man who is so well versed in theory and so skilled in practice, what can't he accomplish?
……
If possible, please give me some love and send me free love electricity. You can send it by clicking on the reminder. If you get more than 500 love electricity gifts a day, I will update more. I am a full-time writer. Please, muah~